Cork floor installation process explain the whole process, a rare floor installation process reference!!
2023-12-07
There are three kinds of installation methods of the floor: wooden keel installation, suspension installation, self-leveling cement paste installation, the floor pays attention to "three-point floor, seven-point pavement", the choice of installation method is to determine the service life of the floor! Self-leveling cement paste installation system is the most stable and popular installation method in the world, and it is also the most responsible installation process for customers!
1
Gross floor cleaning, repair
Remove the protruding objects such as plaster, paint and cement hard blocks on the ground with a special shovel knife, and vacuum the original ground to leave no dust and make the floor cleaner. Find the original floor defects, seiko fine chisel, in order to improve the flatness of the original ground, to do not miss.
2
Ground polishing and vacuum
The ground is finely ground with a grinder, and the flatness of the ground is accurate, so that the error with the surrounding ground is controlled within 2.0 mm.
3
Finished facade protection
Protect the corners of furniture that may be touched.
4
Interfacial agent
Roll coating interface agent, the corner of the wall is first manually coated, which is the best dissolving agent for the original ground and self-leveling cement, to ensure that the ground base and self-leveling cement are closely bonded, and have a certain moisture-proof function.
5
Mixing self-levelling cement
Mixing self-leveling cement, you must use professional tools to stir the self-leveling cement, under the action of the rotating force of the mixing head to make the self-leveling cement mix more uniform and more delicate.
6
Rake the self-leveling cement
Rake self-leveling cement: After the cement mixing is completed, it should be poured into the construction site as soon as possible, so that the self-leveling cement in the state of no wind, the rake can evenly control the self-leveling construction thickness of 2.0-3.0mm. For the self-leveling cement exhaust, after raking, the exhaust drum should be used as soon as possible to vent gas treatment, construction personnel must wear cleats to improve the strength and quality of self-leveling cement.
7
Self-leveling cement grinding dust suction
Polish the self-leveling cement, remove burrs or individual height differences on the surface of the self-leveling cement, do further fine leveling treatment, and vacuum the ground, and do a good job of preparation before gluing.
8
gumming
Roll coating professional water-based environmental protection glue, first the corner of the hand coating, and then roll coating. This glue is consistent with the synthetic water-based environmental protection glue of cork floor, ensuring that the ground and the floor are completely formed as a whole, effectively making the floor not cracking, not warping, and not drum.
9
Scribing installation
Lay the planned line from the middle to both sides of the pavement, perfect pavement pattern, and reduce losses, and no expansion joint is required between the wall.
10
Paved floor
Professional installation master carefully installed.
12
Coating fluid
After 48 hours, maintain the floor.
Share to:
