How about engineering wood flooring, common features of engineering wood flooring

[Abstract] the ground in addition to the use of ceramic tile decoration, Wood Floor is also a good choice, with the texture of the floor to create the ground is not the same as the aesthetic, is a lot of family favorite products. Nowadays, engineering wood floors are used in many decorations. How about using engineering wood floors and what are the characteristics of engineering wood floors?

In addition to the use of ceramic tile decoration on the ground, wood floor is also a good choice, with the texture of the floor to create a different aesthetic to the ground, is a favorite product of many families. Nowadays, engineering wood floors are used in many decorations. How about using engineering wood floors and what are the characteristics of engineering wood floors?

What about Engineered Wood Flooring?

The so-called engineering wood floor, in fact, is used in large-scale projects in the wood floor, this kind of floor is generally selected to strengthen the floor, mainly used in shopping malls and other public places laying decoration, but this kind of floor of the indicators are generally lower than the floor density used by the family, so it is only suitable for public places, not family occasions.

The base material of engineering wood floor is relatively large in particles. This kind of wood floor is not as delicate and uniform as qualified plates. Of course, this kind of product must pay attention to its wear resistance. For the determination of wear resistance, it can also be detected by pressing the general sandpaper by hand, and the qualified plate will not show flower marks after being ground for more than 10 circles.

Therefore, the engineering wood floor is a good choice for the decoration of floor tiles in public places.

Common characteristics of engineering wood flooring

1. Compared with solid wood flooring, the surface wear resistance is high (solid wood reaches the national standard wear resistance: about 300 turns, and strengthened to reach the national standard wear resistance: more than 4000 turns), with higher flame retardant performance, strong pollution and corrosion resistance, and good compression and impact resistance;

2. The product has poor repairability. Once it is damaged, it must be more: due to the use of formaldehyde-based adhesives in the production process, this kind of floor has a certain formaldehyde release problem. If the formaldehyde release exceeds a certain standard, it will have a certain impact on human health and cause pollution to the environment. (household general use E0 grade laminate flooring, green time floor for E0 grade laminate flooring)

3, from the specifications are divided into standard, wide plate and narrow plate: standard, the width is generally 191-195mm. The length is about 1200 and about 1300. Wide plate, the length is more than 1200mm, the width is about 295mm. The narrow plate has a length of about 808mm and a width of about 130mm. Similar to the specifications of solid wood flooring, most of them are called imitation wood flooring.

How to buy engineering wood flooring

Engineering wood flooring contains a certain amount of formaldehyde in the adhesive, excessive formaldehyde is harmful to the human body, if the human body is in a high concentration of formaldehyde for a long time, there will be a risk of cancer. China has issued a mandatory standard for the concentration of formaldehyde in the air of public places, which is not more than 0.12mg/m3. According to national regulations, the formaldehyde content of laminate flooring is not more than 30mg/100g, as far as possible below 9mg/100g.

Engineering wood floor water absorption rate of choice: the higher the index, the more easy to expand the floor. The State has set this target within 2 per cent. Therefore, when purchasing, we must pay attention to its water absorption rate.