The correct process of waxing wood floor and precautions
2024-03-25
1, during the construction period, try to choose sunny day waxing, rainy day humidity is too high, waxing will produce white turbidity phenomenon. When the room temperature is below 5 degrees, the floor wax will harden.
2, need to use a clean cloth to wipe the ground before waxing, if the use of chemicals containing rags to wipe the floor, will lead to poor adhesion of the floor wax.
2
Waxing process:
Clean:
1. Remove dirt on the floor surface.
2. Wipe the stains on the floor with diluted neutral detergent.
3. Wipe with a wet cloth that is forcefully wrung out.
Full drying:
1, the floor surface and groove of the moisture completely dry before waxing. The time required varies depending on the season, but it usually takes more than half a day.
2, if not fully dried, the floor wax will not be closely attached to the floor surface, affecting the appearance of white phenomenon.
Waxing:
1, shake the container with floor wax, and fully stir evenly;
2, before the overall waxing of the floor of the room, it is necessary to carry out a local trial in the corner of the room and other inconspicuous places to confirm whether there is any abnormality.
3, fully dip the floor wax with a clean rag, with no dripping is appropriate;
4, according to the direction of the wood grain of the floor carefully daub, do not miss coating or uneven thickness.
5, to maintain the thickness is the key to waxing.
3
Number of waxes:
1. Waxing is not the more the better
2, the general operation mode is: twice. Once the bottom wax, once the surface wax can be polished.
Share to: