What are the common problems of wood floor construction?

2023-11-20

First, the floor appears empty phenomenon
The material under the Wood Floor is not solid, and there will be a feeling of emptiness. This is mainly caused by the weak keel and the small number of nails. Of course, sometimes it may be because the plate is not strictly checked when purchasing, resulting in the shrinkage of the plate, which leads to the feeling of emptiness; If you want to prevent this phenomenon, you should be careful in the selection of materials. During the laying process, the necessary supervisor is necessary, and once it is found that there are inappropriate places, it is necessary to immediately request rework.

Second, the ground laying is not smooth
Uneven base or wood floor quality is not high enough is the main reason for uneven laying. When laying, construction personnel should be equipped with a level, in case of problems can be adjusted in time. To avoid this problem, the main thing is to look at the material. In addition, the insulation layer should be kept dry, the keel should be flat and standardized, and the wood floor should be protected from moisture.

Third, the wood floor seam is not tight
There are two main reasons why the seams are not tight. One is the material problem, the plate size difference is too much, or the corners are not straight may lead to the seam is not tight. Another important reason is that the builder is not careful enough, in the process of laying, we had better be able to go to the site to supervise the construction, to ensure construction standards.

Four, wood floor found warping drum phenomenon
The local uneven wood floor is very easy to appear local warping drum phenomenon, which is mainly the floor absorbs a lot of water and causes deformation, if the joint between the board and the board is too small, it will increase the degree of warping drum. In the process of laying wood floors, pay attention to ventilation at the same time, but also pay attention to timely cleaning the water on the ground.

Five, Solid Wood Floor keel can not be too thick
The size of the dragon bone square can not be too thick, otherwise it will affect the use of space, the general thickness of 4×1.5 ~ 2cm. Keep clean between the keel, keel fixed smoothly, no loosening phenomenon. If the floor is uneven, the keel should be kept level, and the keel may be elevated at this time, and attention should be paid to the elevated place.

Six, there is a height difference between the floor and the floor tile
Some customers home living room and room paving will be the floor tile and floor, but the floor and floor tile paving will appear high and low, affecting the beauty.
You can ask a professional installer to know the thickness of the floor before the floor is paved. Do some ground leveling or keel laying according to the thickness of the laying.

Seven, color difference problem
Pay attention in advance to the color of each piece of solid wood floor will be different, so it should be formally laid before the selection of color, texture similar to the floor, so that the overall paving effect will not have a large difference. It should be noted that when the floor enters the market, it is best to check the quality of the floor through hand touch and visual inspection, and find and replace any problems in time.

8. Pay attention to window ventilation after installation
After the wooden floor is laid, it can be used after 24 hours, so as not to affect the use of the floor in the future. If it is the summer installation of wooden floors and do not temporarily stay in the situation, it is necessary to often open Windows to ventilate, maintain indoor air circulation, and avoid arch, tile and other phenomena due to indoor humidity. If installed in winter, the window ventilation can avoid the floor due to long-term uninhabited floor cracks or cracks; Put several POTS of water in the room as appropriate.

Previous: North American black walnut solid wood flooring project case Next: Wood floor installation engineering scale difference control