What matters to pay attention to when paving solid wood flooring

2023-11-28

When installing solid wood flooring, most owners feel that as long as the selected floor is good enough, the installation will not have any problems. If you think so, you are very wrong. All said "three points on the floor, seven points on the installation" this sentence is not unreasonable, the quality of the laying will not only affect the beauty and comfort of solid wood flooring, but also determine the service life of solid wood flooring. So what do you need to pay attention to when paving solid wood flooring?

One: Prevent the occurrence of uneven ground
Before installing solid wood floors, ensure that the ground is dry, smooth, and free of debris. Usually the installation of the floor is to wait until the completion of other decorative projects can be carried out, if the ground is not smooth, it will lead to a part of the floor and keel suspended phenomenon, when people tread on the above, it will make a sound.

Two: Solid wood flooring can not be used immediately after unpacking
After the Solid Wood Floor is transported to the construction and installation site, it can not be immediately unpacked for installation, and must be stored indoors for more than a week after the packaging is removed. Wait until the solid Wood Floor and the temperature and humidity of the room adapt to each other before use.

Three: Prevent the keel from drying
Usually the moisture content of the wood keel without drying will be about 25%, and the moisture content of the wood floor is generally about 12%, if the humidity difference is too large, it is easy to lead to rapid moisture absorption of the wood floor, and the floor will arch over a long time, the paint will burst and other phenomena. Therefore, it is best to choose dry, straight wood to do the keel, determine the level of the keel, before the keel and the ground with steel nails fixed.

Four: Prevent assembly too loose or too tight
When assembling solid wood floors, do not assemble solid wood floors too loose or too tight. The tightness of the assembly should be reasonably arranged according to the temperature of the indoor environment, if the assembly is too loose, there will be a large gap with the contraction of the floor. If the assembly is too tight, the floor will bulge as it expands.

Five: Do not appear the floor length direction and the direction of the door is inconsistent
In the construction of wood flooring, it is necessary to pay attention to the length and direction of the floor to be consistent with the orientation of the entry, to ensure that it can give a good visual effect.

Previous: Wood floor construction control points Next: Woodwork Engineering Wood Floor Paving Process Flow